swimming pool works
Many of our customers tell us how the treatment plant of a swimming pool works to keep the pool well maintained.(Poolrite SQI400)
In this area I will clarify how the purifier of our pool should work to keep it in ideal conditions.
A - Filtration performance :
- Selector valve in "Filtration".
- Open sump valve.
- Valve of the open skimmers.
- Valve of the vacuum cleaner shut.
- Valve of the impellers open.
Begin the pump engine in manual or automatic close to 5 hours every day (2 hours early in the day and 2 hours at night) 60,000 liters cubic
B - Operation for cleaning the base :
- Selector valve in "Filtration".
- Closed sump valve.
- Skimmers valve ½ open or shut contingent upon the case.
- Valve of the vacuum cleaner open.
- Valve of the impellers open.
- Turn the pump engine on physically or automatically.
C - Cleaning the prefilter :
- With the pump engine stopped.
- Selector valve in "Shut".
- Closed sump valve.(H2Flo Chlorinator)
- Valve of the skimmers shut.
- Valve of the vacuum cleaner shut.
- Valve of the impellers shut.
- If you loathe the straightforward Prefilter top, in the event that you take out plastic.
In the wake of having cleaned it, the bushel is returned in its position. The board is cleaned and set up back.
The straightforward cover is put and fixed tenderly with the key
- Steps "An" or "B" are taken after.
D - Sand filter washing :
- With the pump engine stopped.
- Selector valve in "Washing".
- Open sump valve.
- Valve of the open skimmers.
- Vacuum valve open or shut (Not essential).
- Valve of the impellers shut.
- Drain valve open (assuming any).
- Start the pump engine in manual.
- Leave the motor running until the water that goes through it sneak (clear plastic cover) is clean.
I call him a sneak since it is he who reveals to us when the sand filter is clean (When it is now straightforward again and you don't see the overcast water)(Clearwater C270)
Stop the pump engine. Once the sand filter has been cleaned, it is fitting to wash or flush before setting the selector valve in filtration. It is done similarly as washing, yet it just changes that the selector enter is set in "Flush"
Once the washing and flushing has been done, supplant the valves as in case "An" or "B".
Begin the pump engine in manual or automatic.
A few GUIDELINES
Purging the air in the filter :
On account of filters that are situated over the water level, this activity will be finished with the pump engine running.
On account of filters that are situated underneath the water level, this task will be finished with the motor stopped.
The tap situated behind the measure opens until the point when just water turns out.
Turn on the tap once more.
At the point when would it be advisable for me to clean the prefilter?
Glancing through the straightforward plastic cover you can check whether the prefilter is trapped.
Take after the directions in segment "C".
At the point when would it be a good idea for me to clean the sand filter?(swimming pool pump)
The manometer shows in excess of 1.5 Kg or has left the shaded piece of green.
Take after the guidelines in segment "D".
pH
The pH levels ought to be in the vicinity of 7.2 and 7.6.
In the event that the level is higher than 7.6, add pH to the pool water as indicated by the maker's directions.
In the event that the level is under 7.2, add pH + to the pool water as indicated by the pH + producer's directions.
Chlorine
Chlorine levels ought to be in the vicinity of 1 and 1.5.
In the event that there isn't sufficient chlorine, add to the pool water as indicated by the maker's guidelines.
In the event that there is excessively chlorine, expel the tablets from the water and let the sun demonstration.
In the event that there is an overstated measure of chlorine, exploit a sand filter wash by exhausting water from the pool and after that including water without chlorine.
The outcome is a clean pool in great condition.
In this area I will clarify how the purifier of our pool should work to keep it in ideal conditions.
A - Filtration performance :
- Selector valve in "Filtration".
- Open sump valve.
- Valve of the open skimmers.
- Valve of the vacuum cleaner shut.
- Valve of the impellers open.
Begin the pump engine in manual or automatic close to 5 hours every day (2 hours early in the day and 2 hours at night) 60,000 liters cubic
B - Operation for cleaning the base :
- Selector valve in "Filtration".
- Closed sump valve.
- Skimmers valve ½ open or shut contingent upon the case.
- Valve of the vacuum cleaner open.
- Valve of the impellers open.
- Turn the pump engine on physically or automatically.
C - Cleaning the prefilter :
- With the pump engine stopped.
- Selector valve in "Shut".
- Closed sump valve.(H2Flo Chlorinator)
- Valve of the skimmers shut.
- Valve of the vacuum cleaner shut.
- Valve of the impellers shut.
- If you loathe the straightforward Prefilter top, in the event that you take out plastic.
In the wake of having cleaned it, the bushel is returned in its position. The board is cleaned and set up back.
The straightforward cover is put and fixed tenderly with the key
- Steps "An" or "B" are taken after.
D - Sand filter washing :
- With the pump engine stopped.
- Selector valve in "Washing".
- Open sump valve.
- Valve of the open skimmers.
- Vacuum valve open or shut (Not essential).
- Valve of the impellers shut.
- Drain valve open (assuming any).
- Start the pump engine in manual.
- Leave the motor running until the water that goes through it sneak (clear plastic cover) is clean.
I call him a sneak since it is he who reveals to us when the sand filter is clean (When it is now straightforward again and you don't see the overcast water)(Clearwater C270)
Stop the pump engine. Once the sand filter has been cleaned, it is fitting to wash or flush before setting the selector valve in filtration. It is done similarly as washing, yet it just changes that the selector enter is set in "Flush"
Once the washing and flushing has been done, supplant the valves as in case "An" or "B".
Begin the pump engine in manual or automatic.
A few GUIDELINES
Purging the air in the filter :
On account of filters that are situated over the water level, this activity will be finished with the pump engine running.
On account of filters that are situated underneath the water level, this task will be finished with the motor stopped.
The tap situated behind the measure opens until the point when just water turns out.
Turn on the tap once more.
At the point when would it be advisable for me to clean the prefilter?
Glancing through the straightforward plastic cover you can check whether the prefilter is trapped.
Take after the directions in segment "C".
At the point when would it be a good idea for me to clean the sand filter?(swimming pool pump)
The manometer shows in excess of 1.5 Kg or has left the shaded piece of green.
Take after the guidelines in segment "D".
pH
The pH levels ought to be in the vicinity of 7.2 and 7.6.
In the event that the level is higher than 7.6, add pH to the pool water as indicated by the maker's directions.
In the event that the level is under 7.2, add pH + to the pool water as indicated by the pH + producer's directions.
Chlorine
Chlorine levels ought to be in the vicinity of 1 and 1.5.
In the event that there isn't sufficient chlorine, add to the pool water as indicated by the maker's guidelines.
In the event that there is excessively chlorine, expel the tablets from the water and let the sun demonstration.
In the event that there is an overstated measure of chlorine, exploit a sand filter wash by exhausting water from the pool and after that including water without chlorine.
The outcome is a clean pool in great condition.
Comments
Post a Comment